Drop Down MenusCSS Drop Down MenuPure CSS Dropdown Menu
Showing posts with label Colloids. Show all posts
Showing posts with label Colloids. Show all posts

APPLICATION OF COLLOIDS


The therapeutic properties of some medicinal products are increased when they are formulated in colloidal state. For example

1.      Colloidol calome (Hg nitrate , gelatin, NaCl) has higher antiseptic activity than in the coarse powder.
2.      Colloidal Silver chloride (AgCl), Silver Iodide (AgI), and Silver (Ag) proteins are germicidal which do not cause irritation as their ionic Ag salts.
3.      Adsorption of toxins from GIT by kaolin and the rate of neutralization of excess acidity in the stomach by Aluminium hydroxide is higher if the compounds are in colloidal form.
4.      Blood plasma substitutes are colloidal dispersions in which the particle size is big to allow retention in blood vessels for adequate time (eg dextran inj BP, polyvinyl pyrolidone (PVP).
5.      Natural and synthetic polymers are in colloidal range. Starch, cellulose are pharmaceutical adjuncts; synthetic polymers are used as coatings to tablets for protection against moisture and acid degradation in stomach.

6.      Colloidal dispersions containing radioactive isotopes are used for diagnostic and therapeutic purposes in nuclear medicine. Technetium 99m sulphur colloid is used in liver, spleen and bone scanning. Radioactive colloids that accumulate in tumors, lesions or emboli indicating their location and size may be used as diagnostics. The radiation emitted is made visible by scanning devices. Radiocolloids are useful in treatment of cancer because they accumulate in target organs.

PREPARATION OF COLLOIDS

Lyophobic dispersions

The most common medium for lyophobic dispersion is water. Insoluble organic and inorganic compounds usually with a low degree of hydration are dispersed in aqueous medium and are intrinsically unstable. The particles tend to coalesce or aggregate to reduce the surface area and hence surface energy. Thus special means must be utilized to stabilize these systems –preventing the otherwise spontaneous coalescence or coagulation of the disperse phase after it has been finely dispersed. There are two methods of preparing lyophobic sols, namely Condensation methods (aggregation of small molecules or ions until particles of colloidal dimensions are obtained) and dispersion methods (reducing coarse particles to colloidal dimensions through comminution or peptization).

Condensation Method:

This method involves aggregation of small molecules or ions until particles of colloidal dimensions result.

To illustrate this method, the preparation of sulphur hydrosol is exemplified. Whereas sulphur is insoluble in water, it soluble in alcohol. Alcohol and water are miscible. Sulphur is dissolved in alcohol, and the solution is mixed with water to produce a bluish-white colloidal dispersion. The dispersion must be stabilized to avoid precipitation or agglomeration. The same method can be used to prepare hydrosol of stearic acid, mastic acid and other polymers.

Suphur vapor may also be stremed in water to produce a colloidal dispersion. This is a less common method.

Condensation may also be produced chemically. For example bubbling hydrogen sulphide (H2S) gas into a solution of sulphur dioxide (SO2) :



2H2S   +  SO2    ===>                       3S   +   H2O



or mixing solutions of sodium thiosulphate and sulfuric acid:


===>H2SO4 + 3NaS2O3                             4S +NaSO4 + H2O


Aluminium hydrxide sol is produced by hydrolysis of Aluminium chloride.

            AlCl3  +  3 H2O                          ===> Al(OH)3 + 3HCl                                


** See preparation of White lotion (precipitated ZnS and S)

Dispersion method:

The methods involve reducing coarse particles to colloidal dimensions through comminution or peptization.

Mechanical disintegration: 

Using equipment such as micronizers, colloid mills, homogenizers, or even simple mortar and pestle, solids and liquids are sheared or attrited into fine size for dispersion. Ultrasonic generators produce waves that break soft materials e.g. sulphur, talcum and graphite into very small particles or droplets. Thus method is used to produce very fine emulsions for I.V. use.

The dispersion must be stabilized to avoid re-crystallization, coagulation or calescence.

Peptization:

This involves breaking up aggregates into smaller particles. It is synonymous to defflocculation. It can be brought by removing flocculating agent (eg electrolyte) or addition of a deffloculating agents or peptizing agents (eg surfactants, ions or water soluble polymers). Eg activated charcoal produces a grey dispersion, Addition of 0.1% Na laurylsulphate or octoxynol disintegrates the particles into fine ones, results in fine deep black dispersion.  

Purification of colloidal dispersions

Hydrosols may contain low molecular weight water-soluble impurities including salts formed by reaction producing the dispersion. The salts tend to coagulate the dispersion and hence must be removed. Blood  ( a colloidal dispersion of plasma proteins) of patients with renal insufficiency has high concentration of urea and other metabolites. These as well must be removed to acceptable levels. Substances in true solutions may be separated from those in colloidal dispersion by means of dialysis or ultrafiltration.
Dialysis:

This is based upon the fact that colloidal particles do not diffuse (or diffuse very slowly) through membrane of parchment, cellophane, collodion or certain animal tissues, while particles of molecular or ionic dimensions diffuse relatively rapidly. Thus if  the low  molecular weight impurities are to be removed from a colloidal dispersion the latter is placed inside a sac made of one of the above mentioned membranes and dipped in water. The small solutes will diffuse out while pure colloidal materials are retained.

The rate of dialysis is increased increasing the area of membrane (e.g. using numerous hollow fibres, stirring and maintaining a high concentration gradient (dialysis fluid must be replenished continuously). If the impurities are electrolytes, the dialysis process can be speeded up by applying an electric potential to the sol. The process is then known as electrodialysis, and the equipment used is electrodialyser. Application of pressure in a dialytic process also speeds up the process. This is known as ultrafiltration.

Application of dialysis.

Dialysis is used in the laboratory to purify sols and study binding of drugs by proteins, as well as in some manufacturing process. The blood in uremic patients is dialysed  to remove urea, creatinine, uric acid, phosphates and other metabolites. The dialyzing fluids contain Na+, Cl- , KCl, Acetates, dextrose etc in same concentration as plasma. Urea, creatinine, uric acid, phosphates and other metabolites diffuse from blood side to dialysis fluid until their concentration equilibrates to that in blood. NaCl, KCl diffuse at initial high concentration until equilibrium. The volume of dialysis fluid is much higher than that of blood to ensure complete removal of unwanted metabolites and is continuously replenished. Plasma proteins and blood cells do not pass out because of their big size. Edema is relieved by vacuum pressure. The process is known as haemodialysis. It is also employed in cases of acute poisoning.

OPTICAL PROPERTIES OF COLLOIDS, Faraday-Tindall effect

If a narrow beam of light is passed through a colloid, its path is visible. This is not possible with true solutions. The visible cone seen is due to light-scattering action by the colloidal particles and is known as the Faraday-Tindall effect.



The Faraday-Tindall effect is employed in the ultramicroscope and electron microscope. In the ultramicroscope an intense beam of light is passed through a sol against a dark background at right angle to the plane of observation. The particles are observes as bright spots and can be counted. For Better resolution, an electron microscope is used and very minute particles (molecular level) can be observed in terms of size, shape, and structure. The electron microscope uses a beam of high-energy electrons instead of the normal light.

The light scattering property is also used to determine the concentration of sol through measurement of turbidity, a phenomenon known as turbidimetry. Turbidity, τ, is a fractional decrease in intensity due to scattering as the incident light passes through a solution.

                        τ  = 1 ln Is
                               l      I    Where l = length of dispersion through which the light
passes
                                                                 Is = Light scattered in all directions
                                                                 I  =  Intensity of incident light


If the turbidity of suspension of known concentration is determined, the concentration of a certain value can be determined.

We can also use turbidity to measure molecular weight.
                       
 Hc / τ = 1/M +2Bc   Where H and B  are constants of a particular system,
                        c is concentration and M is the molecular weight.

STABILITY OF COLLOIDS

Effect of added electrolytes on ζ

The addition of electrolytes to a colloidal system reduces zeta potential or even reverses it. The electrolytes supply additional anions and cations so that the density of ions of opposite charge to the charge on the wall is increased. Thus the ionic atmosphere is compressed near the surface and the potential gradient in the fixed layer is greatly increased and the potential in the diffuse layer (as well as the zeta potential) is decreased. As the concentration of the counterions in the liquid increases, the ζ is continuously reduced tending to zero, and may even be reduced. The higher the valence of the electrolyte, the higher the reduction of potential. Thus trivalent ions are more effective than divalent ions, which are in turn more effective than monovalent ions.

The presence and magnitude or absence of charge on colloidal particles is an important factor in stability of colloidal systems. However, lyophilic and lyophobic colloids differ in their stability requirements and hence each is approached separately.

Stability of lyophobic colloids
A lyophobic sol is thermodynamically unstable. It is produced from insoluble substances which have been subdivided as polymolecular aggregates throughout the liquid phase. The enormous increase in surface area results in an increase in surface energy. Particles therefore have a tendency to aggregate and precipitate in order to reduce this energy. The tendency to aggregate is offset by the repulsive forces between particles due to the charge at the surface of the particles. Not however that there exist Van der Waal forces of attraction between particles. Thus there are two opposing forces between any two colloidal particles, attraction and repulsion.

Forces acting between two particles in colloidal sol

Consider two particles in close proximity. They attract each other by Van der Waals forces of attraction which vary inversely as x7 ( where x = distance between them). The particles also repel each other due to electrostatic forces which vary inversely as x2. The resultant force between the particles as a function of their distance apart was explained independently by Derjaguin and Landau in the USSR and by Verwey and Overbeek in the Netherlands in the early 1940’s. This is now called DLVO theory, and is summarized in the following figure:

Consider two particles approaching each other. Curve A represents the Van der  Waals attractive energy (which decrease with second power of the inter-particle distance). Curve R represents the electrostatic repulsive forces (which decrease exponentially with the seventh power of the inter-particle distance). The combination of these two opposing forces, attraction dominates at large distance and shallow trough is exhibited at x3. This so-called secondary minimum is significant in controlled flocculation in preparation of suspensions.. As the particles still approach each other, repulsion begin to dominate at intermediate distance, to reach maximum at x2, so called primary maximum. Repulsion occurs because when particles approach each other the two atmospheres of counterions surrounding them begin to interpenetrate or overlap at point o. Repulsion occurs because of the work involved in distorting the diffuse double layer and in pushing water and counterions aside, which increase as the particles approach further to reach maximum at point x2. At this point the potential energy barrier exceeds the kinetic energy of the approaching particles, and the particles will not come close to each other, and the dispersion shall be stable. But if the kinetic energy exceeds the potential energy, at x2 or beyond, the particles continue to approach each other past this point, where van der Waals forces of attraction become more important than the repulsive forces. The net potential energy decrease to zero and then becomes negative as the particles continue to approach each other, until when they touch at point a (x1) otherwise known as primary minimum. This corresponds to a very stable situation in which particles adhere, and are attached permanently (irreversible caking in suspensions). In other words, the particles agglomerate or the sol is said to coagulate. This situation is irreversible because no kinetic energy can be applied to overcome the potential energy. In practice the particles cannot approach further than this point, but theoretically, if the particles were to approach further than the touching distance, they will meet with very rapid rise in potential energy, because they will be interpenetrating each other, causing the atomic orbitals to overlap and face repulsive Bonn repulsive forces.

Addition of Electrolytes decrease the height of the primary maxima and the range over which the electrostatic repulsion is effective, and hence lead to coagulation. The lowest concentration at which an electrolyte coagulates the sol is called coagulation value, Cv. It does not depend on valence of the anion, but depends on the valence of the counterions, decreasing by one or two orders of magnitude for each increase in heir valencies. This is the Schulze-Hardy rule.

Effects of added solvents:

The addition of water miscible solvents e.g. alcohol, glycerin, propylene glycol or polyethylene glycol (to aqueous dispersions) lowers the dielectric constant ε of the medium. This reduces the thickness of the double layer and therefore the range over which electrostatic repulsion is effective, and lowers the size of potential energy barrier. Thus addition solvents to aqueous dispersion lead to coagulation. At concentration to low to cause coagulation, solvents make dispersions more sensitive to coagulation by added electrolytes, i.e. they lower the Cv

Stabilization by adsorbed surfactants:

Recall that surfactant molecules are amphiphiles having  a polar and non-polar parts. When placed in a medium of dispersed system, they accumulate at interfaces and orient themselves in such a way that the hydrocarbon (non-polar) part is in contact with non-polar particles or oil droplets while the polar group is oriented towards the polar (usually water) phase. This is known as oriented physical absorption. The adsorption of ionic surfactants increases the charge density and the zeta potential ζ of disperse particles. This in turn increases electrostatic repulsion among non-polar organic particles and hence stabilization of the system. This is known as charge stabilization.

Water-soluble non-ionic surfactants are usually hydrated making the particle surface where they are adsorbed to be surrounded by a thin layer of water. This hydrophilic shell forms a steric barrier which prevents close contact between particles and hence coagulation. This known as steric stabilization. Moreover, non-ionic surfactants reduce the sensitivity of hydrophobic sols towards coagulation by salts, i.e. they increase the coagulation value Cv.

Surfactants added to a flocculated sol tend to pry apart the flocs by wedging themselves between the particles and their area of contact. This allows in more surfactant molecules and hence breaks-up the flocs. The system becomes deflocculated or undergoes peptization.

Peptization is defined as formation of colloidal dispersion by action of solvent i.e. breaking up of large particles into colloidal range. Peptization can be spontaneous e.g. albumin and water form a “solution” due to extensive solvation. But some action may be needed to bring about peptization. E.g. precipitated substances may be brought into colloidal dispersions either by providing a peptizing agent usually a surfactant, or by removing a flocculating agent similar to deflocculation). When activated charcoal is added to water with stirring, grains are broken up incompletely. The suspension is no good. Addition of 0.1% sodium laurylsulphate or octoxynol disintegrates the particles to fine ones and the dispersion changes color from gray to deep black. Alumium hydroxide Al(OH)3 in the presence of aluminium chloride (AlCl3) is a poor colloidal dispersion. Washing with water removes AlCl3 and a good colloidal dispersion forms.

Ophthalmic and parenteral suspensions should be deflocculated to prevent irritation and capillary blockage respectively. But because deflocculated systems tend to cake, a process of controlled flocculation is used in preparing such suspensions.

Stabilization by adsorbed polymers;

Water-soluble polymers act like surfactants and are adsorbed at interface. The polar part attracts and encloses water of hydration forming a sheath that surrounds the particles. This layer is part of the particles and prevents the particles from touching each other to coagulate. This kind of steric stabilization is said have protective action. The sol thus protected has resistance to coagulation by salts. The water-soluble polymers whose adsorption stabilizes hydrophilic sols against coagulation are called protective colloids, e.g. gelatin, serum albumin, povidone and dextran. The stabilizing efficiency of a protective colloid is determined by its gold number. (define the gold number of  a polymer)
 
Some protective colloids at concentrations below those at which they exert a protective action may cause sensitization, i.e. a decrease in the stability of hydrophobic sols.

ELECTROKINETIC PHENOMENA

Electrokinetic phenomena include Electrophoresis, electrosmosis, sedimentation potential and Streaming potential, whereby a potential is created when charged particles move with respect to a stationary liquid or particles move upon application of a potential. The phenomena are evidence that particles are charged. 

Electrophoresis:
When a dc electric field is applied to a dispersion, the particles move towards the electrode of a charge opposite to that on their surface. The counterions located inside their hydration shell are dragged along. The counterions in the diffuse layer outside the plane of shear will move towards the other electrode. This phenomenon is called electrophoresis. The rate of migration of particles is observed by means of an ultramicroscopic and is a function of the charge on particle. As mentioned earlier, the potential at the plane of shear is the Zeta potential. The sign and magnitude of zeta potential can be measured from a knowledge of the direction and rate of migration.

ζ =       ν  x  4πη  x (9 x 104)
E       ε

Where ν is the velocity of migration (cm/sec)
η = viscosity of the medium (poise), ε is the dielectric constant
E is potential gradient (volts/cm).
ζ  is in volts.
The expression v/E is known as mobility.

Sedimentation potential:
The reverse of electrophoresis, that is a potential is created when particles undergo sedimentation (against a stationary liquid).

Electrosmosis:
If a charged surface is immobile (e.g. a packed bed of particles), application of an electric field causes the counterions in the free water to move towards the opposite electrode, dragging the solvent with them. Thus the liquid moves relative to the stationary charged surface, and the phenomenon is known as electrosmosis. The pressure produced is the electroosmotic pressure. By determining the rate of flow of a liquid under standard conditions, Zeta potential can be measured.

Streaming potential
If the liquid is made to flow past a charged surface in a capillary tube by applying hydrostatic pressure, the displacement of the counterions in the free water produces a potential difference between the two ends of the tube or bed. This potential is known as Streaming Potential. Measuring this potential, Es, and knowing the applied pressure, P, we can obtain from zeta potential from the following equation:

ζ =   4πηκΕl
            εP

Where l = length of capillary, and κ is conductivity of liquid.

ELECTROKINETIC PROPERTIES OF COLLOIDS

Particles in a liquid medium may become charged. Because of this charge on the surface of the particles, electro kinetic properties arise.

There are several ways in which a colloidal particle may acquire a charge:

·         Selective adsorption of a particular ion species present in a dispersion or a solution. The ion may have been added to the solution or in the case of water, it may be the hydronium (H+) or hydroxyl (OH-). Thus particles in water are negatively charged due to preferential adsorption of (OH-) ions. Ionic surfactants are also adsorbed and impart corresponding charge.
·         Particles also acquire charge through ionization of groups or moieties at the surface. In proteins, one end of the polypeptide has carboxylic acid group (COOH) which ionize to give a negative charge. The other end group has amino group (NH2) and ionize to give a positive charge. The predominating charge depends on the pH of the medium. Thus the particles may be negatively or positively charged or neutral. Similarly Aluminium hydroxide gel (Al(OH)3) form Al3+ in acid and [Al(OH)]4+ in alkalis.
·         Non-ionizing particles may also acquire a charge due to a difference in dielectric constant between the disperse phase and the dispersion medium. The phase with a greater e acquires a negative charge.

Electric Double Layer.

Due to a charge on the particles in a colloidal sol, ions of opposite charge are attracted firmly to the surface of the charged particle to form a layer.  The ions of opposite charge further distribute themselves diffusely in  the vicinity of the particle to form a second layer. The two layers constitute a phenomenon known as the electrical double layer. Although the particle is charges, the system is electrically neutral, because the two layers described above neutralize each other.

In order to understand the electrical double layer better, let us follow an example of silver iodide sol. Silver iodide may be obtained in the following reaction:

------>AgNO3 + NaI                         Ag I   + NaNO3                            
If the reaction is carried out with excess AgNO3 there will be excess Ag+ than I – ions on the surface of the AgI precipitate, and the particle will be positively charged. The NO3- ions will surround the particles and will form the first layer. Na+ and other NO3- ions will distribute diffusely to form the second layer of the electrical double layer. If on the other hand there were excess of NaI in the reactants, the surface would contain negative charge.
In the bulk of the particle, the two ions (Ag+ and I-)are exactly I equimolar proportions. In the medium (water) where the particles are suspended, Na+ and NO3- ions dominate, and some I – , H+, OH-  ions are also apparent.

The negative charge on the surface of the particle attracts positive ions from the solution, and repels negative ions. These I – ions adsorbed at surface are known as potential determining ions. They attract oppositely charged ions from the medium to the surface. Thus, Na+ are concentrated in the immediate vicinity of the surface and tend to stick to the surface, approaching it as closely as their hydration spheres permit. Na+ Ions in this respect are called counterions or gegenions. They form a compact layer called Stern layer.

NO3- ions are repelled, and together with some Na+, I –, H+, OH- and Ag+ , due to thermal agitation of water, form a second diffuse layer called the Gouy-Chapman layer. The combination of the two layers of oppositely charged ions constitutes an Electric double layer.

The electric potential at the surface of the particle is equal to the work against electrostatic forces required to bring a unit electric charge from the bulk of the solution (infinity) to the surface of the particle, and is known as surface potential or Electrothermodynamic potential or Nernst Potential g0. On moving away from the surface towards the bulk, the potential drops rapidly across the Stern layer (Na ions screen further removal of other Na ions in the diffuse part of the double layer).In the Gouy-Chapman layer, the drop of potential is more gradual, tending to zero asymptotically as the composition of cations and anions approach equilibrium. The thickness of the double layer has been arbitrarily assigned the value of 0.37go.
(0.37 = 1/e). It usually ranges from 10 – 1000 Å and decreases as the concentration of electrolytes in solution increases, more rapidly for counter ions of high valence.

In aqueous dispersions, particles are surrounded by a layer of water of hydration attached to them by ion-dipole and dipole-dipole interaction. When a particle moves, this shell of bound water and all ions located inside it move along with the particle. If on the other hand water in a solution flows through a fixed bed of these solid particles, the hydration layer surrounding each particle remains stationary attached to it. The electric potential at the plane of shear separating the bound water from the free water is the zeta potential, ζ. It is less than the Stern potential. Zeta-potential is of practical importance when compared to other potentials because it can be measured experimentally. It is important in the stabilization of dispersed systems since it governs the degree of repulsion between adjacent dispersed particles. If the zeta potential is reduced below a certain value, the attractive forces exceed the repulsive forces and the particles come together or undergo flocculation. 

KINETIC PROPERTIES OF COLLOIDS

The kinetic properties relate to the motion of particles with respect to the dispersion medium. The motion may be thermally induced (Brownian movement, diffusion, osmosis) or gravitationally induced (sedimentation) or applied externally (viscosity). The motion relating to electrical field considered as electro kinetic phenomenon and will be  discussed separately.


Brownian Motion


This is the erratic motion of the particles in colloidal dispersions as can be observed using a microscope. It is due to bombardment of the particles by moving molecules of the dispersion medium. The velocity of the particles increases with decreasing size.  Increasing the viscosity of the dispersion medium e.g. by addition of glycerin, decreases and finally stops Brownian motion.

Diffusion


This is the movement of particles from region of higher concentration of solute or disperse phase to one of lower concentration until the concentration comes to equilibrium. This movement is due to Brownian motion.
The amount of a substance (δq) diffusing in time δt across a plane of area S is directly proportional to the change in concentration δC with distance traveled δx, according to Fick’s first law.

Δq = -DS δC/ δx δt

Where D is the diffusion coefficient, which is the amount diffusing per unit time across a unit area when δC/ δx, concentration gradient =1.


When the material is allowed to pass through a porous disc, and samples are removed and analyzed periodically, D can be found. From D, the size of the particle (radius) can be found using  an equation suggested by Sutherland and Einstein:  (Also known as Stokes- Einstein Equation)
D = kT
      6πηr

where k = Boltzman constant, T = absolute Temperature
η= viscosity of the dispersion medium and r = radius of the particle

            OR      D = RT           
                              6πηrN
                       
            Where R = Universal Gas constant and N = Avogadro’s Number.

Osmotic Pressure:

The osmotic pressure of a very diluted solution is equal to a pressure that a solute would exert if it were a gas occupying the same volume. Using Van’t Hoff’s Equation,
            Π V = nRT

Where Π = Osmotic pressure, V = volume, n = number of moles,
R = Universal gas constant and T= absolute temparature.

Π = n RT
       V

 =  c RT           (n/V =c)

 =  Cg RT        Where Cg = grams of solute per liter of dispersion
      M               or solution, M = Molecular weight
            Rearranging,
                                    Π =  RT
                                    Cg    M

                                    By plotting Π Vs Cg  , RT/M = slope

                                    By plotting Π/Cg  Vs Cg, you get a straight line and the intercept as Cg tends to 0 is RT/M and hence M can be found.
In practice, the equation is modified to

 
                                    Π =  RT (1/M + BCg),
                                    Cg
where B is a constant for any particular solvent/solute system. The inclusion of BCg is necessary to account for the effect of shapes of particles, which in the above equation are assumed to be spherical, but in practice the particles are solvated and may be elliptical, oblong or linear.
                                       
Sedimentation

The velocity of sedimentation, ν, of spherical particles of radius r and having density δ in a medium of density δ0 and viscosity η0 can be calculated from the Stoke’s law:

                        ν = 2r2 (δ – δ0 )g    Where g = acceleration due to gravity
                                    9 η0

Smaller particles (< 5μ in diameter) are affected by Brownian motion and may not obey Stoke’s law. A stronger force must be applied to bring about the sedimentation of colloidal particles. This is accomplished by using ultra centrifuge in which case g is replaced by the centrifugal force ω2x in which ω = angular velocity and x  is the distance of the particle from the center of rotation:

            ν = 2r2 (δ – δ0 ) ω2x
                        9 η0

Using Schlieren Photographs to measure the distance x1-x2 , for a particle falling between times t1 to t2 and by knowing the angular velocy ω, diffusion coefficient D, it is possible to calculate the molecular weight of a polymer such as protein, by using the expression

            M = RT s
                    D(1- υρ0)

Where ν = partial specific volume of the protein and s = Svedberg sedimentation coefficient s = dx/dt
                                                ω2x
                                                            By integration, ln (x2/x1)
                                                                                      ω2 (t2-t1)
Viscosity:
Viscosity is resistance to flow of a system under an applied stress. Viscosity data like those of sedimentation and osmotic pressure can be used to determine molecular weight and shape of the particles of a given material of a dispersed phase.

If h0 is the viscosity of the dispersion medium, h is the viscosity of the dispersion and q is the volume fraction of the colloidal particles, then
h =  h0 (1 + 2.5q )

Relative viscosity is defined as

hrel = h/h0  = 1 + 2.5q

Specific viscosity, hsp  is defined as

hsp  = h/h0  - 1 = 2.5q

Since the volume fraction is directly related to concentration c,
hsp /c = k

Thus by plotting hsp /c against c, a straight line is obtained, with the intercept equal to k, which is a constant known as intrinsic viscosity [h]

By using this constant, and applying Mark-Houwink’s equation,

[h] = kMa
                                k and a are constants characteristic of the particular polymer-solvent system

The molecular weight M of a colloid can be found.  Molecular weights of dextran, starch and gelatin have been found using this approach.

The viscosity of lyophobic dispersions is not much greater than that of a dispersion medium., while lyophilic dispersions are much more viscous compared to their respective solvents. Highly concentrated polymers may be jelly-like solids.


Temperature also affects the viscosity highly, as T increases h decreases. The shape of particles of the dispersed phase also affects viscosity. Thus spherocolloids have low viscosity compared to linear colloids.

PHYSICAL PROPERTIES AND STABILITY OF COLLOIDAL DISPERSION

The difference in physical properties of a substance in “normal” dimensions and in colloidal dimensions is due to the increased specific surface when large particles are subdivided into particles of colloidal size.  The specific surface Asp is defined as the ratio of surface area A, to the volume V, or to the mass

Asp = A/V = 4πr2 / 4/3πr3

= 3/r cm-1


Also   Asp   = A/M = A/Vδ =  4πr2 / 4/3πr3δ

                        = 3/rδ

If a cube , 1 cm on edge is repeatedly subdivided into smaller cubes until each of the latter is 1 μm on edge (of colloidal dimension), the total surface area will increase from 6cm2  to 6000cm2, but the specific surface will increase to 6x107 cm-1

As the surface area increases, there is a corresponding increase in surface energy. In an attempt to decrease these energy, smaller particles or droplets tend to regroup to decrease the surface area. Thus colloidal dispersions are intrinsically unstable, with a tendency to flocculate or agglomerate.

The reduction in particle size to colloidal dimensions may lead to change in other physical properties which arte otherwise considered constant. For example solubility and osmotic pressure may increase, while vapor pressure and melting point may decrease. Color also changes as the particle size is reduced. Thus large particles of antimony trisulfide are red, changing to yellow in finely divided particles. Sols of gold with large particles are purple or blue, but become brilliant red as particles become fine.

The shape of the particles affects viscosity. Sols of spherical particles (e.g. hemoglobin) have lower viscosity while threadlike particles (e.g. fibrin) confer high viscosity to their sols.

Finally decreasing particle size will increase the adsorption capability, due to an increase in the surface area. Have a Question? Submit below on a comment box

CLASSIFICATION OF COLLOIDAL SYSTEMS

The classification of colloidal dispersions as advanced by Oswald is based on the affinity or interaction between the dispersed phase and the dispersion medium. Three categories are discernible in this classification, namely lyophilic, lyophobic and association colloids.

Lyophillic dispersions: [=solvent loving]
·         These are dispersions in which there is considerable attraction between dispersed phase and dispersion medium (or extensive solvation).
·         Because of high affinity, lyophilic colloids form spontaneously when the dispersed phase (e.g. solid) come onto contact with dispersion medium(e.g. liquid).
·         The lyophilic colloids are thermodynamically stable.
·         They are reversible

When the dispersion medium is water the system is called hydrophilic. Examples of hydrophilic colloid include bentonite, acacia, gelatin and starch. All these disperse spontaneously in water.

Substance that have high affinity for oils are called lipophilic or oleophilic. Examples of oleophilic substances include gum, rubber, and polystyrene which disperse spontaneously in benzene, activated charcoal forms dispersion in all oils, and aluminium stearate disperse readily in cottonseed oil.

LYOPHOBIC DISPERSIONS

Colloids with little attraction , if any, for the dispersion medium are called lyophobic colloids. (lyophobic = solvent hating). Hydrophobic dispersions include oleophilic materials such as polystyrene, steroids, paraffin wax, and lipophilic drugs all of which are not hydrated by water. Gold, silver and sulfur are all hydrophobic.

Lyophobic dispersions
·         Are not easily prepared. They do not form spontaneously as lyophilic colloids. Special methods must be applied to prepare lyophobic colloids. These include dispersion methods and condensation methods. (the methods will be discussed later on).
·         Are intrinsically unstable. Therefore they must be stabilized.
·         Are irreversible that is if the dispersion medium is separated from the disperse phase, the dispersion cannot be reconstituted.

ASSOCIATION COLLOIDS


Certain molecules or ions are characterized by having two distinct regions of opposing solution affinities within  the same molecule or ion. Such molecules are called amphiphiles. In low concentration amphiphiles exist as separate molecules and their size4 is too small to form colloids.(subcolloids). When the concentration is increased, a critical concentration shall be reached when the molecules aggregate (up to 50 or more monomers) t form micelles that are large enough (around 0.5 μm) to lie within the colloidal range. The concentration at which the micelles begin to form is called critical micelle concentration (CMC). The number of monomers that aggregate to form a micelle is known as the aggregation number of the micelle. Because micelles are large enough to qualify as colloidal particles; such compounds are called association colloids.

As with lyophobic colloids,

·         Formation of association colloids is spontaneous, as long as the concentration of amphiphiles in solution exceeds the CMC.
·         The association colloids are stable

Compare and contrast lyophobic, lyophilic and association colloids. (See Martin, Physical pharmacy).


PROPERTY
LYOPHOBIC SOL
LYOPHILIC SOL
ASSOCIATION COLLOIDS
Particle size
Inorganic particles eg gold, silver
Large organic molecules
Aggregates of small organic molecules (micelles)
Solvation
Little, if any interaction (salvation) occurs between particles and dispersion medium
Dispersed molecules are solvated (interaction with dispersion medium).
Hydrophobic or hydrophilic portion of the molecule is solvated depending on whether the dispersion medium is water or oil
Ease of formation
Molecules disperse spontaneously to form colloidal solution
Molecules disperse spontaneously to form colloidal solution
Colloidal aggregates are formed spontaneously when CMC is reached
Addition of electrolytes
Stabilized by small amounts. Slight excess lead to coagulation
Stable in presence of electrolytes. Destabilized by high conc. of electrolytes (salted out) may be due to desolvation by electrolytes
In aqueous medium, CMC is reduced by by addition of electrolytes. Salting out may occur at higher concentration of electrolytes.
Reversibility
Not easily redispersed upon evaporation of the medium.
Redispersible
Redispersible (reversible)
Faraday-Tindal effect
Intense
diffuse

Electrical charge
Essential to stabilize
Not essential. Can be adjusted by pH.

Viscosity
Viscosity is not greatly  increased by presence of lyophobic colloidal particles. It may be similar to dispersion medium
Very viscous. At sufficient concentration, they form a gel
Viscosity increases as the concentration of amphiphille increases as micelles ncrease in number and become asymmetric.